Connecting The Scansnap To A Computer In Access Point Connect Mode (Ix1500) - Fujitsu ScanSnap iX1600 Basic Operation Manual

Connecting the ScanSnap to a Computer in Access Point
Connect Mode (iX1500)
Configure the wireless settings for the ScanSnap in the ScanSnap Wireless Setup Tool Wizard or on
the touch panel to complete the preparation for connecting the ScanSnap to a computer.
For details, refer to the following:
l "Connecting the ScanSnap to a Wireless Access Point by Using the ScanSnap Wireless Setup
Tool (iX1500)" (page 115)
l "Connecting the ScanSnap to a Wireless Access Point from the Touch Panel (iX1500)" (page
116)
The following explains how to connect the ScanSnap and a computer when the wireless settings for
the ScanSnap have already been configured.
1.
Disconnect the USB cable connecting the ScanSnap to the computer.
ATTENTION
If the ScanSnap Manager icon is
a The ScanSnap is automatically connected to the computer via wireless LAN and the
ScanSnap Manager icon changes to
If the icon does not change, go to step 2.
HINT
l If the [Connect automatically to previous ScanSnap by Wi-Fi] checkbox is selected and the
previously connected ScanSnap is available for the connection, the computer is connected to
the ScanSnap automatically.
l The computer can be connected to only one ScanSnap.
l Only one computer can be connected to the ScanSnap via wireless LAN.
2.
Right-click the ScanSnap Manager icon
at the far right of the taskbar and select [Connect by Wi-Fi] from the
Click Menu" (page
a The [ScanSnap Manager - Connect by Wi-Fi] window appears.
3.
From the list of the ScanSnap units to be connected, select the ScanSnap
that you want to connect, and click the [Connect] button.
ATTENTION
If the intended ScanSnap for connection does not appear in the list of the ScanSnap units to be
connected, refer to the ScanSnap Manager Help.
a The ScanSnap is connected to a computer via wireless LAN and the ScanSnap Manager
icon changes to
Connecting the ScanSnap to a computer or mobile device via Wireless LAN (iX1500)
, exit ScanSnap Connect Application on the mobile device.
86).
.
120
.
in the notification area located
"Right-