Fujitsu ScanSnap iX1600 Basic Operation Manual page 292

ATTENTION
When the [Place document face up] checkbox is selected in the [Scanning mode option] window,
load the documents face-up and bottom edge down.
To open the [Scanning mode option] window, click the [Option] button in the [Scanning] tab of the
"ScanSnap Setup Window" (page
7.
Adjust the side guides to the width of the documents.
Hold each side guide in the middle to adjust them. Otherwise, the documents may be fed
skewed.
8.
Press the [Scan] button on the ScanSnap to start a scan.
ATTENTION
Do not perform the following operations during scanning. Doing so will stop scanning.
l Connect or disconnect the ScanSnap and other USB devices.
88).
Documents
292
Scanning Documents with S1300i
Side Guide