Fujitsu ScanSnap iX1600 Basic Operation Manual page 142

2.
Turns on the ScanSnap.
For details, refer to
a After blinking blue, the Wi-Fi indicator lights up in blue or orange.
3.
Press the WPS button of the wireless access point.
4.
Press and hold (3 seconds or longer) the WPS button on the back of the
ScanSnap within 2 minutes after pressing the WPS button of the wireless
access point.
iX500
iX100
a The ScanSnap is connected to the wireless access point and the Wi-Fi indicator lights up in
blue.
If connection cannot be established, the Wi-Fi indicator blinks or lights up in orange.
ATTENTION
If you cannot connect the ScanSnap to a wireless access point, refer to "Troubleshooting" in the
ScanSnap Manager Help.
HINT
For details about the Wi-Fi indicator status, refer to the following:
l iX500
"Parts and Functions of iX500" (page 70)
Reconnecting to a Wireless Access Point Using the ScanSnap WPS Button (iX500/iX100)
"Turning the ScanSnap On" (page
WPS Button
WPS Button
91).
142