Connecting The Scansnap To A Computer - Fujitsu ScanSnap iX500 Basic Operation Manual

Connecting the ScanSnap to a Computer

You can use the ScanSnap Wireless Setup Tool Wizard to complete the preparation for connecting
the ScanSnap to a computer.
For details, refer to "Setting a Wireless LAN Using the ScanSnap Wireless Setup Tool" (page
The following explains how to connect the ScanSnap and a computer when the wireless settings
have already been configured by using the ScanSnap Wireless Setup Tool Wizard.
1.
Disconnect the USB cable connecting the ScanSnap to the computer.
ATTENTION
If the ScanSnap Manager icon is
device.
a The ScanSnap is automatically connected to a computer via wireless LAN and the
ScanSnap Manager icon changes to
If the icon does not change, go to step 2.
HINT
l If the [Connect automatically to the last connected ScanSnap by Wi-Fi] checkbox is selected
and the last connected ScanSnap is available, the computer is connected to the ScanSnap
automatically.
l The computer can be connected to only one ScanSnap.
l Only one computer can be connected to the ScanSnap.
l When you automatically connect a computer and the ScanSnap that had been connected via
wireless LAN before, if the password for the ScanSnap to be connected is changed, a
notification window notifies you of the status.
2.
Click the ScanSnap Manager icon
[control] key on the keyboard, and then select [Connect by Wi-Fi] from the
"ScanSnap Manager Menu" (page
a The [ScanSnap Manager - Connect by Wi-Fi] window appears.
3.
From the list of the ScanSnap units to be connected, select the ScanSnap
that you want to connect, and click the [Connect] button.
ATTENTION
l If the [ScanSnap Manager - Enter Destination Password] window appears, enter the
password to connect.
The default password is the last four digits of the ScanSnap serial number.
The password can be changed with the ScanSnap Wireless Setup Tool. For details, refer to
the ScanSnap Wireless Setup Tool Help.
l If the intended ScanSnap for connection does not appear in the list of the ScanSnap units to
be connected, refer to the ScanSnap Manager Help.
Connecting the ScanSnap via Wireless LAN
, exit ScanSnap Connect Application on the mobile
.
in the Dock while holding down the
38).
50
49).