Fujitsu ScanSnap iX1600 Basic Operation Manual page 463

a It clicks when it returns to its original position.
8.
Connect the power cable to the AC outlet, and turn on the ScanSnap.
9.
Reset the Roller Set counter.
1. Press
2. Press
3. Press [Check consumable status] to display the [Check consumable status] screen.
4. Press the [Reset] button.
5. When a message is displayed, press the [OK] button.
a The value of the current count for the [Current Count / Replacement Cycle] is set to "0".
on the touch panel to display the [Settings] screen.
to display the [Maintenance] screen.
463
Replacing Consumables for iX1500