Cleaning The Inside Of S1300I - Fujitsu ScanSnap iX1600 Basic Operation Manual

Cleaning the Inside of S1300i

Scanning repeatedly may cause dust and paper dust to accumulate inside the ScanSnap resulting in
a scanning error.
As a guideline, the inside of the ScanSnap should be cleaned every 200 sheets scanned. Note that
this guideline varies depending on the types of documents you scan. For instance, it may be
necessary to clean the scanner more frequently when you scan documents on which the toner is not
sufficiently fused.
l Before cleaning the ScanSnap, you must turn off the ScanSnap and unplug
l Do not place internal parts such as the pad assy and the pick roller
l When the ScanSnap is operating, the internal glass surface will be hot.
l Do not use aerosol spray or spray that contains alcohol to clean the
l While cleaning the ScanSnap, pay attention to the inside structure of the
ATTENTION
l Do not use water or mild detergent to clean the inside of the ScanSnap.
l It may take a long time for Cleaner F1 to dry if an excessive amount is used. Moisten the cloth with
moderate quantity.
Wipe off the cleaner completely to leave no residue on the cleaned parts.
HINT
To check the number of sheets scanned with the ScanSnap, see [Total Page Count] in the [ScanSnap
Manager - Check consumable status] window.
To open the [ScanSnap Manager - Check consumable status] window, right-click the ScanSnap
Manager icon in the notification area located at the far right of the taskbar, and select [Check
consumable status] from the
the power connection cable (power cable or USB bus power cable) from the
power supply source (AC outlet or computer). Not doing so may cause fire
or electrical shock.
assembly within reach of small children. Doing so may cause injury.
Before you clean the inside of the ScanSnap, you must unplug the power
connection cable (power cable or USB bus power cable) from the power
supply source (AC outlet or computer) and leave the ScanSnap for 15
minutes or more.
scanner. Paper dust and other dust blown up by strong air from the spray
may enter the inside of the scanner which may cause scanner failure or
malfunction.
Also note that sparks generated by static electricity may cause a fire.
ScanSnap and avoid accidentally getting your hand or a cloth caught on the
pick spring (metal part). Otherwise, the pick spring (metal part) may be
deformed, which causes injury.
"Right-Click Menu" (page 86).
442
Cleaning S1300i