Fujitsu ScanSnap iX1600 Basic Operation Manual page 431

1. Unplug the power cable from the AC outlet.
2. Pull the ADF release tab towards you to open the ADF top section.
3. Clean the following locations with a cloth moistened with Cleaner F1.
ATTENTION
When cleaning, be careful not to damage the document sensor with a cloth.
l Brake roller (× 2)
Remove the brake rollers from the ScanSnap to clean them.
ADF Paper Chute (Cover)
ADF Release Tab
ADF Top Section
Document Sensor
Brake Roller (x2)
Idler Roller (x4)
Scan Glass (x2)
Pick Roller (x2)
Ultrasonic Sensor (x2)
431
Cleaning iX500