Scanning Books (Sv600) - Fujitsu ScanSnap iX1600 Basic Operation Manual

Scanning Books (SV600)

1.
Press the [Scan] or [Stop] button on the ScanSnap to turn the power on.
a The power LED lights up in blue.
In addition, the ScanSnap Manager icon in the notification area located at the far right of
the taskbar changes from
2.
Place the Background Pad on the front side of the ScanSnap.
Place the Background Pad so that it is in contact with the ScanSnap.
3.
Place a book in the scan area of the ScanSnap and press the [Scan] button.
For details, refer to
HINT
You can also enable page turning detection by holding down the [Scan] button on the ScanSnap
for 2 seconds or longer. When page turning detection is used, turning a book's page
automatically starts scanning.
For details, refer to
to
"How to Place Documents (SV600)" (page
"Scanning Books Using Page Turning Detection (SV600)" (page
[Stop] Button
[Scan] Button
.
261).
269
Scanning Documents with SV600
279).