Connecting Your Computer To Scansnap; Connecting The Ac Adapter - Fujitsu ScanSnap fi-4110EOX2 Operator's Manual

2.2

Connecting Your Computer to ScanSnap!

Follow the procedure below to connect your computer to ScanSnap!.
1. Connect ScanSnap! to the power outlet using the AC cable.
2. Connect your computer to ScanSnap! using the USB cable.
ATTENTION
The following describes each of the above two procedures.

■ Connecting the AC Adapter

Connect the power cable by the following procedure.
1. Connect the AC cable to the AC adapter.
2. Connect the connector of AC adapter to the AC adapter connector on ScanSnap!.
3. Insert the AC cable into the power outlet.
14
Be sure to connect the AC cable first before connecting the USB cable.
AC adapter connector