Fujitsu ScanSnap iX1600 Basic Operation Manual page 99

HINT
To continue using the ScanSnap, reset the time until auto power-off by performing one of the following:
l Insert a document in the ScanSnap
l Press the [Scan/Stop] button on the ScanSnap
l Close the feed guide and open it again
SV600
To turn the ScanSnap back on, perform one of the following operations:
l Press the [Scan] button on the ScanSnap (this will not start scanning)
l Press the [Stop] button on the ScanSnap.
HINT
To continue using the ScanSnap, reset the time until auto power-off by pressing the [Scan] button on
the ScanSnap.
Changing the ScanSnap's Power Settings
iX1500
1. Click the ScanSnap Manager icon
bar and select [Exit] from the
a ScanSnap Manager exits.
2. Press on the
3. Press
4. Press [Automatic power off] to display the [Automatic power off] screen.
5. Press the setting field for [ScanSnap will automatically power off] to display a list.
6. Change the setting.
7. Press to return to the home screen.
iX500/iX100/SV600/S1300i
You can change the time of the ScanSnap to turn off automatically or change the setting so that it
will not turn off automatically. Set according to the following procedures:
1. Right-click the ScanSnap Manager icon
from the "Right-Click Menu" (page
a The [ScanSnap Manager - Preferences] window appears.
"Right-Click Menu" (page
touch panel of the ScanSnap to display the [Settings] screen.
to display the [Scanner settings] screen.
86).
in the notification area located at the far right of the task
86).
in the notification area and select [Preferences]
99
Turning the ScanSnap On or Off