Changing The Frequency For Connecting The Scansnap (Ix1500) - Fujitsu ScanSnap iX1600 Basic Operation Manual

Changing the Frequency for Connecting the ScanSnap (iX1500)

Change the setting of the frequency for connecting the ScanSnap which is used when the scanner is
connected to a wireless access point.
HINT
In some regions, a 5 GHz wireless LAN cannot be used.
If you are using the ScanSnap in the region where a 5 GHz wireless LAN cannot be used, you cannot
change the frequency for the connection.
1.
Click the ScanSnap Manager icon
far right of the task bar and select [Exit] from the
86).
a ScanSnap Manager exits.
2.
Press on the
screen.
3.
Press
4.
Press [Access point connection] to display the [Access point connection]
screen.
5.
Press [Frequency for the Connection] to change the frequency for the
connection.
6.
Press to return to the home screen.
touch panel of the ScanSnap to display the [Settings]
to display the [Wi-Fi settings] screen.
Changing the Wireless LAN Connection Method (iX1500)
in the notification area located at the
"Right-Click Menu" (page
158