Fujitsu ScanSnap iX1600 Basic Operation Manual page 246

Scanning Documents Larger Than A4 or Letter Size by Directly
Inserting Them in the ScanSnap (iX100)
By folding an A3, B4, or Double Letter size document in half and scanning each side continuously,
the scanned images of both sides are automatically merged and saved as a single image.
For details about documents that can be scanned, refer to
ATTENTION
l Scanned images are automatically merged only when there is text, diagram, or a table on the fold
line of the folded document.
- When scanned images are automatically merged
- When scanned images are not automatically merged
l After a document is scanned, if the scanned images are not merged automatically, you can use the
ScanSnap Organizer Merge Pages function to merge the scanned images.
For details, refer to the ScanSnap Organizer Help.
l For a document that will have scanned images which are not merged automatically, you can use
the optional Carrier Sheet to scan the document and merge the scanned images automatically.
For details, refer to
(iX100)" (page 250).
l If scanned images are unexpectedly merged, clear the [Merge both side images] checkbox on the
[Scanning mode option] window, and then scan the document again.
To open the [Scanning mode option] window, click the [Option] button in the [Scanning] tab of the
"ScanSnap Setup Window" (page
1.
Open the feed guide of the ScanSnap.
"Scanning Documents Larger than A4 or Letter Size with the Carrier Sheet
88).
"Documents to Scan (iX100)" (page
246
Scanning Documents with iX100
230).