Checking The Mac Address Of The Scansnap (Ix1500) - Fujitsu ScanSnap iX1600 Basic Operation Manual

Checking the MAC address of the ScanSnap (iX1500)

Check the MAC address of the ScanSnap on the touch panel.
1.
Click the ScanSnap Manager icon
far right of the task bar and select [Exit] from the
86).
a ScanSnap Manager exits.
2.
Press on the
screen.
3.
Press
4.
Check that [Wi-Fi connect mode] is set to [Access point connection] or
[Direct connection].
If [Wi-Fi connect mode] is set to [Wi-Fi off], press [Wi-Fi connect mode] and set it to [Access
point connection] or [Direct connection]
5.
Press [Wi-Fi information] to display the [ScanSnap information] screen.
6.
Check the [MAC address] in the [Network] tab.
Registering a Certificate/ Checking the Wireless LAN Settings (iX1500)
touch panel of the ScanSnap to display the [Settings]
to display the [Wi-Fi settings] screen.
in the notification area located at the
"Right-Click Menu" (page
150