Fujitsu ScanSnap iX1600 Basic Operation Manual page 118

4. Go back to the touch panel of the ScanSnap, and press the [Next] button in the [WPS
(button)] screen within two minutes.
5. Press the [Complete] button in the [Check Connection Results] screen.
6. Press to display the home screen.
When connecting the scanner by using the PIN code of the WPS function of a
wireless access point
1. Select [WPS (PIN)].
2. Press the [Next] button to display the [WPS (PIN)] screen.
Take a note of the PIN that is displayed in the screen in case you forget it.
3. Open the window for setting the WPS for the wireless access point in a computer or mobile
device, and enter the PIN for the ScanSnap.
The wireless access point is ready to be connected from the ScanSnap.
HINT
For details about the WPS function, refer to the manual of your wireless access point.
4. Go back to the touch panel of the ScanSnap, and press the [Next] button in the [WPS
(PIN)] screen within two minutes.
5. Press the [Complete] button in the [Check Connection Results] screen.
6. Press to display the home screen.
a The computer and the ScanSnap are connected via wireless LAN using the same wireless
access point.
Connecting the ScanSnap to a Wireless LAN (iX1500)
118