Fujitsu ScanSnap iX1600 Basic Operation Manual page 479

13.
Connect the power connection cable (power cable or USB bus power cable)
to the power supply source (AC outlet or computer), and turn on the
ScanSnap.
14.
Reset the pick roller count.
1. Click the ScanSnap Manager icon
the taskbar and select [Check consumable status] from the
→ The [ScanSnap Manager - Check consumable status] window appears.
2. Click the [Reset] button for [PICK ROLLER Count].
→ A confirmation window appears.
3. Click the [Yes] button.
→ [PICK ROLLER Count] is reset to 0.
in the notification area located at the far right of
479
Replacing Consumables for S1300i
"Right-Click Menu" (page 86).