Fujitsu ScanSnap iX1600 Basic Operation Manual page 425

When cleaning, be careful not to damage the document sensor with a
cloth.
l Brake roller (× 1)
Remove the brake roller from the ScanSnap to clean them.
For details about how to remove the brake roller, refer to
iX1500" (page 457).
Gently wipe off the dirt and dust along the grooves on the roller surface.
Be careful not to damage the surface of the rollers.
l Rubber idler roller (× 2), plastic idler roller (× 2)
Gently wipe the dirt and dust off the rollers as you rotate them manually.
Be careful not to damage the surface of the rollers.
Make sure that they are cleaned properly because residue on the rollers will affect the
feeding performance.
l Pick roller (× 1)
Remove the pick roller from the ScanSnap to clean them.
For details about how to remove the pick roller, refer to
iX1500" (page 457).
Gently wipe off the dirt and dust along the grooves on the roller surface.
Be careful not to damage the surface of the rollers.
Make sure that they are cleaned properly because residue on the rollers will affect the
feeding performance.
"Replacing Consumables for
"Replacing Consumables for
425
Cleaning iX1500