Wlan Communication; Meter Connection - Sungrow SG2.0RS-S User Manual

User Manual
Step 6 Remove the waterproof lid from the C C O O M M 1 1 terminal and install WiNet-S.
Step 7 Slightly shake it by hand to determine whether it is installed firmly.
- - - - E E n n d d

5.7.2 WLAN Communication

Step 1 Remove the waterproof lid from the C C O O M M 1 1 terminal.
Step 2 Install the module. Slightly shake it by hand to determine whether it is installed firmly, as
shown below.
Step 3 Refer to the guide delivered with the module for the set-up.
- - - - E E n n d d

5.8 Meter Connection

Step 1 Unscrew the swivel nut from the communication connector.
5 Electrical Connection
33