Wifi-P2 Connection; Wlan Communication - Sungrow SG3.0RS-L User Manual

5 Electrical Connection
step 4 Seal the unused PV terminals with the terminal caps.
- - End
5.7

WiFi-P2 Connection

The WiFi-P2 module supports WLAN communication.

5.7.1 WLAN Communication

step 1 Remove the waterproof lid from the COM1 terminal.
step 2 Install the module. Slightly shake it by hand to determine whether it is installed firmly, as
shown below.
step 3 Refer to the guide delivered with the module for the set-up.
- - End
40
User Manual