Wlan Communication - Sungrow SG5.0RS-ADA User Manual

User Manual
step 6 Remove the waterproof lid from the COM1 terminal and install WiNet-S.
step 7 Slightly shake it by hand to determine whether it is installed firmly.
- - End

5.7.2 WLAN Communication

step 1 Remove the waterproof lid from the COM1 terminal.
step 2 Install the module. Slightly shake it by hand to determine whether it is installed firmly, as
shown below.
step 3 Refer to the guide delivered with the module for the set-up.
- - End
5 Electrical Connection
43