Installing The Pv Connectors - Sungrow SG2.0RS-S User Manual

User Manual
1: Positive crimp contact
Step 3 Lead the cable through cable gland, and insert the crimp contact into the insulator until it
snaps into place. Gently pull the cable backward to ensure firm connection. Tighten the
cable gland and the insulator (torque 2.5 N.m to 3 N.m).
Step 4 Check for polarity correctness.
If the PV polarity is reversed, the inverter will be in a fault or alarm state and will
not operate normally.
- - - - E E n n d d

5.6.3 Installing the PV Connectors

Step 1 Rotate the DC switch to "OFF" position.
5 Electrical Connection
2：Negative crimp contact
29