User Manual
Step 6 Insert the terminal plug into the C C O O M M 2 2 terminal at the bottom side of the inverter and
then install the housing.
Step 7 Slightly pull out the cable and then fasten the swivel nut. Lock the connector with the
screw.
- - - - E E n n d d
5.9 DRM Connection
In Australia and New Zealand, the inverter supports DRM0 as specified in the standard
AS/NZS 4777.
The DRM0 mode is asserted by shorting terminals R R and C C on the inverter.
5 Electrical Connection
35