Replacing The Oven Door - GASLAND chef Pro Series Installation Instructions Manual

39 17

Replacing the oven door

CAUTION
The door is very heavy. You may need help lifting the door high enough to slide it
into the hinge slots. Do not lift the door by the handle.
1. Using two hands, grasp the side edges of the
door at the midpoint.
Face the oven cavity.
2. Locate the slots on each side of the oven
cavity for the door hinge locks.
3. Hold the door at a 45° angle, and then align
the door hinges with the slots in the lower
front of the oven cavity. Slowly insert the door,
making sure you maintain the 45° angle. You
will know the door is engaged in the slot when
you feel a slight drop.
4. Lower the oven door to the fully open position.
If the oven door does not open to a full 90°,
repeat steps 1 through 3.
5. Locate the oven door hinge locks in the
corners of the oven door, and rotate the hinge
locks toward the oven cavity to the locked
position.
See Step 3 (Fig.21) in the "Removing the
oven doors" section for the proper locked
position.
6. Close the oven door.
7. When the hinges are properly installed and the door is closed, there should be
an even gap between the door and the control panel. If one side of the oven
door is hanging lower than the other, the hinge on that side is not properly
installed.
1 (844) 538-7890
support@gaslandchef.com
Slot in the oven
cavity for the
door hinge lock
Fig.24
Fig.25
Fig.26
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418