Critical Installation Warnings - GASLAND chef Pro Series Installation Instructions Manual

Single wall oven

Hide thumbs Also See for Pro Series:

Instruction manual (89 pages)

Installation instructions manual (56 pages)

Installation instruction (49 pages)

Table Of Contents

Table of Contents

• Placement of oven racks. Always place the oven rack in the desired

location while the oven is cool. If the rack must be moved while the oven is

hot, use potholders. Do not let the potholders come in contact with the hot

heating element in the oven.

• Do not allow aluminum foil or a meat probe to contact the heating elements.

• During use, the appliance becomes hot. Care should be taken to avoid

touching heating elements inside the oven.

• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the

oven door glass. They can scratch the surface which may result in the glass

shattering.

Caution

Do not attempt to operate the oven during a power failure. If the power fails,

always turn the oven off. If the oven is not turned off and the power returns,

the oven may begin to operate again. Food left unattended could catch fire or

spoil.

Self-clean ovens

• Do not clean the door gasket. The door gasket is essential for a good

seal. Care should be taken not to rub, damage, or move the gasket.

• Never keep pet birds in the kitchen. Birds are extremely sensitive to the

fumes released during an oven Self-clean cycle. Fumes may be harmful or

fatal to birds. Move birds to a well-ventilated room.

• Clean only the parts listed in this manual in the Self-clean cycle. Before

Self-clean the oven, remove the partition, rack, utensils, and any food.

• Before operating the Self-clean cycle, wipe grease and food soils from the

oven. Excessive amounts of grease may ignite, leading to smoke damage to

your home.

• Do not use any commercial oven cleaner or oven liner protective coating of

any kind in or on the outside of the oven.

• Remove the nickel oven shelves from the oven before you begin the

Self-clean cycle or they may discolor.

• If the Self-clean mode malfunctions, turn the oven off and disconnect the

power supply. Have it serviced by a qualified technician.

• Excess spillage must be removed before you run the Self-clean cycle.