Replace Oven Door - GASLAND chef Pro Series Installation Instructions Manual

04. Using two hands, grasp the edges of the oven
door. Lift and pull the oven door toward you and
remove. You may need to gently shift door from
side to side as you pull.
05. Set the oven door(s) aside on the prepared
covered work surface with the oven door resting
on its handle.
06. To continue with the oven installation, go to the
"Positioning Oven Feet for Multiple Cabinet
Cutout Heights" section.

Replace oven door

CAUTION
The door is very heavy. You may need help lifting the door high enough to slide it
into the hinge slots. Do not lift the door by the handle.
01. Using two hands, grasp side edges of door at
the midpoint.
Face the oven cavity.
02. Locate the slots on each side of the oven cavity
for the door hinge locks.
03. At a 45° angle, align door hinges with slots in
the lower front of the oven cavity. Slowly insert
door, making sure you maintain the 45°angle.
You will know the door is engaged in the slot
when you feel a slight drop.
04. Lower the oven door to the fully open position.
If the oven door does not open to a full 90°,
repeat steps 1 through 3.
05. Locate the oven door hinge locks in the corners
of the oven door, and rotate the hinge locks
toward the oven cavity to the locked position.
See Step 1 (Fig.4) in the "Remove Oven
Door(s)" section for proper locked position.
1 (844) 538-7890
support@gaslandchef.com
A. Slot in the oven cavity
for door hinge lock
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
Fig.3
Fig.4
Fig.5
Fig.6
14