GASLAND chef Pro Series Installation Instructions Manual page 47

Error Error Code
Code Description
The oven temperature
is too high even not
E4
under Self-clean
function.
After preheating for 10
minutes. Oven
E5
temperature without
change.
When oven under
preheat, the tempera-
E6
ture will no longerrise
after the previousrised.
1 (844) 538-7890
support@gaslandchef.com
Cause for the
Error Code
The thermal protector K2
or K3 is broken.
Possibly poor contact
between the wiring
terminal of the wire set
and the connector at the
CN7 position of the
circuit board.
The electronic
components of the main
control circuit board are
broken.
Electric range only:
heating elements broken.
Electric range only: AC
240V powered off.
The thermal protector K2
or K3 is broken.
The electronic
components of the circuit
board are broken.
Electric range only:
heating elements broken.
The oven door switch is
broken, causing the
circuit to misjudge that
the door is open, so the
oven stops heating.
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
After Sales
Service
Replace the
thermal protector
K2 or K3.
Replace the
thermal protector
K2 or K3.
Replace the circuit
board.
Replace the circuit
board.
Replace the
heating element.
Replace the oven
door switch.
46