GASLAND chef Pro Series Installation Instructions Manual page 45

Troubleshooting
Error Error Code
Code Description
The main circuit board
can not detect the
E0
temperature sensor
(k-type thermocouple).
A failure of the oven
E1
door circuit.
1 (844) 538-7890
support@gaslandchef.com
Cause for the
Error Code
The temperature sensor
(k-type thermocouple)
may be damaged and
circuit open.
Possibly poor contact
between the temperature
sensor (k-type
thermocouple) and the
connector at the CN2
position of the circuit
board.
The IC at the IC5 position
of the circuit board may be
damaged.
The door status detection
switch may be damaged.
The door detection switch
wire group plug and the
connector at the CN1 6
position of the circuit board
may be in poor connection.
Poor contact of switch S1.
The circuit and
components of the circuit
board may be damaged.
www.gaslandchef.com
3330-A Marathon Ct Charleston, SC 29418
After Sales
Service
Replace the
temperature sensor
(k-type thermocou-
ple).
Replace the
connector.
Replace the control
board.
Replace the
switch.
Replace the
connector.
Press the port
tightly and reinsert
the switch.
Replace the
circuit board.
44