Configuration Pins - Quectel EM06 Series Manual

Table 18: Pin Definition of Antenna Tuner Control Interface
Pin Name Pin No.
ANTCTL0 59
ANTCTL1 61
ANTCTL2 63
ANTCTL3 65
NOTE
"*" means under development.

3.12. Configuration Pins

The module provides four configuration pins which are configured as WWAN-USB.
Table 19: Definitions of Configuration Pins
Pin No. Pin Name
21 CONFIG_0
69 CONFIG_1
75 CONFIG_2
1 CONFIG_3
The four pins on the module are defined as below:
Table 20: List of Configuration Pins
Config_0 Config_1
(Pin 21) (Pin 69)
GND GND
EM06_Series_Hardware_Design
I/O Description
DO Antenna tuner control
DO Antenna tuner control
DO Antenna tuner control
DO Antenna tuner control
I/O Power Domain
0
0
0
0
Config_2 Config_3
(Pin 75) (Pin 1)
NC NC
LTE-A Module Series
EM06 Series Hardware Design
Comment
1.8 V power domain
1.8 V power domain
1.8 V power domain
1.8 V power domain
Description
Connected to GND internally.
Connected to GND internally.
NC
NC
Module Type and
Main Host Interface
WWAN-USB
Port
Configuration
2
41 / 69