Esd Characteristics; Thermal Dissipation - Quectel EM06 Series Manual

LTE-FDD B30 (10 MHz)
LTE-FDD B66 (10 MHz)
LTE-TDD B41 (10 MHz)
NOTES
1)
1. SIMO is a smart antenna technology that uses a single antenna at the transmitter side and multiple
(two for EM06 series) antennas at the receiver side to improve Rx performance.
2)
2. As per 3GPP specification.

6.7. ESD Characteristics

EM06 series are not protected against electrostatic discharge (ESD) in general. Consequently, they are
subject to ESD handling precautions that typically apply to ESD sensitive components. Proper ESD
handling and packaging procedures must be applied throughout the processing, handling and operation
of any application that incorporates the modules.
The following table shows the electrostatic discharge characteristics of the modules.
Table 38: Electrostatic Discharge Characteristics (Temperature: 25 º C, Humidity: 40 %)
Interfaces
VCC, GND
Antenna Interfaces
Other Interfaces

6.8. Thermal Dissipation

EM06 series modules are designed to work over an extended temperature range. In order to achieve
optimal performance while working under extended temperatures or extreme conditions (such as with
maximum power or data rate, etc.) for a long time, it is strongly recommended to add a thermal pad or
other thermally conductive compounds between the module and the main PCB for thermal dissipation.
EM06_Series_Hardware_Design
-97.5 dBm -98.5 dBm
-97.5 dBm -98 dBm
-95.5 dBm -97.5 dBm
Contact Discharge
± 5
± 4
± 0.5
LTE-A Module Series
EM06 Series Hardware Design
-100 dBm
-100 dBm
-98.5 dBm
Air Discharge
± 10
± 8
± 1
-94.8 dBm
-94.8 dBm
-94.3 dBm
Unit
kV
kV
kV
61 / 69