Gnss Operating Frequencies; Antenna Installation; Antenna Requirements - Quectel EM06 Series Manual

LTE-FDD B30
LTE-FDD B66
LTE-TDD B41
NOTES
1)
1. LTE-FDD B29 and B32 are supported only for Rx and secondary component carrier(s).
2. "*" means under development.

5.1.2.2. GNSS Operating Frequencies

The following table shows frequency specifications of the GNSS antenna connector.
Table 25: GNSS Frequencies
Type
GPS/Galileo/QZSS
GLONASS
BeiDou/Compass

5.2. Antenna Installation

5.2.1. Antenna Requirements

The following table shows the requirements on Main antenna, Rx-diversity antenna and GNSS antenna.
Table 26: Antenna Requirements
Type
1)
GNSS
EM06_Series_Hardware_Design
2305–2315
1710–1780
2496–2690
Frequency
1575.42 ± 1.023
–
1597.5 1605.8
1561.098 ± 2.046
Requirements
Frequency range: 1559
Polarization: RHCP or linear
VSWR: < 2 (Typ.)
EM06 Series Hardware Design
2350–2360
2110–2200
2496–2690
–
1609 MHz
LTE-A Module Series
MHz
MHz
MHz
Unit
MHz
MHz
MHz
47 / 69