Quectel EM06 Series Manual page 14

Transmitting Power
LTE Features
UMTS Features
Internet Protocol Features
SMS
(U)SIM Interfaces
Audio Feature
PCM Interface
USB Interface
EM06_Series_Hardware_Design
⚫
Class 3 (23 dBm ± 2 dB) for LTE-FDD bands
⚫
Class 3 (23 dBm ± 2 dB) for LTE-TDD bands
⚫
Class 3 (24 dBm +1/-3 dB) for WCDMA
⚫
Up to LTE Cat 6
⚫
1.4 MHz to 40 MHz (2 × CA) RF bandwidth
⚫
MIMO in DL direction
⚫
LTE-FDD:
- DL: Max. 300 Mbps
- UL: Max. 50 Mbps
⚫
LTE-TDD:
- DL: Max. 226 Mbps
- UL: Max. 28 Mbps
⚫
3GPP R8 DC-HSDPA, HSPA+, HSDPA, HSUPA and WCDMA
⚫
QPSK, 16QAM and 64QAM modulation
⚫
DC-HSDPA: Max. 42 Mbps (DL)
⚫
HSUPA: Max. 5.76 Mbps (UL)
⚫
WCDMA: Max. 384 kbps (DL/ UL)
⚫
PPP/QMI/NTP*/TCP*/UDP*/FTP*/HTTP*/PING*/HTTPS*/SMTP*/
MMS*/FTPS*/SMTPS*/SSL* protocols
⚫
Support PAP and CHAP protocols, which are usually used for PPP
connection
⚫
Text and PDU modes
⚫
Point to point MO and MT
⚫
SMS cell broadcast
⚫
SMS storage: ME by default
⚫
Support (U)SIM card: 1.8 V, 3.0 V
⚫
Include USIM1 and USIM2 interfaces
⚫
Dual SIM Single Standby
⚫
One digital audio interface: PCM interface
⚫
WCDMA: AMR/AMR-WB
⚫
LTE: AMR/AMR-WB
⚫
Echo cancellation and noise suppression
⚫
Used for audio function with external codec
⚫
Support 16-bit linear data format
⚫
Support long frame synchronization and short frame synchronization
⚫
Support master and slave modes, but must be the master in long
frame synchronization
⚫
Compliant with USB 2.0 specifications, with maximum transmission
rate up to 480 Mbps on USB 2.0.
⚫
Used for AT command communication, data transmission, firmware
upgrade, software debug, GNSS NMEA sentences output and voice
over USB*
⚫
Support USB serial drivers for:
LTE-A Module Series
EM06 Series Hardware Design
13 / 69