Operating The Quick Stick; Throwing Snow - Toro Power Max 1028LXE Operator's Manual

Operating the Quick Stick

Push and hold the blue trigger cap down to use the
Quick Stick to move the discharge chute and the
chute deflector. Release the trigger cap to lock the
discharge chute and chute deflector into position.
Moving the Discharge Chute
Push and hold the blue trigger cap down and move
the Quick Stick to the left to move the discharge
chute to the left; move the Quick Stick to the right to
move the discharge chute to the right.
m-6904
14
Moving the Chute Deflector
Push and hold the blue trigger cap down and move
the Quick Stick forward to lower the chute deflector;
move it rearward to raise the chute deflector.

Throwing Snow

When the snowthrower is in operation, the
impeller and auger can rotate and cut off or injure
hands and feet.
Before adjusting, cleaning, inspecting,
troubleshooting, or repairing the
snowthrower, stop the engine and wait for all
moving parts to stop. Disconnect the wire
from the spark plug and keep it away from the
plug to prevent someone from accidentally
starting the engine.
Remove an obstruction from the discharge
chute; refer to Unclogging the Discharge
Chute on page 15. If necessary, use a stick,
not your hands , to remove an obstruction
from the discharge chute.
Stay behind the handles and away from the
discharge opening while operating the
snowthrower.
m-6904
Keep face, hands, feet, and any other part of
your body or clothing away from concealed,
moving, or rotating parts.
The rotor blades can throw stones, toys, and
other foreign objects and cause serious personal
injury to the operator or to bystanders.
Keep the area to be cleared free of all objects
that the rotor blades could pick up and throw.
Keep all children and pets away from the area
of operation.
3351-174
Danger
Warning