Setting The Data Code - Canon DIM-462 Instruction Manual

Setting the Data Code

You can also choose to display the camcorder data (shutter speed and exposure settings) in the
data code.
+ PLAY
TAPE
(VCR)
DISP.SET UP
( 20)
Open the menu and select DISP.SET UP. Then select DATA CODE, set it to
DATE/TIME, CAMERA DATA or CAM. & D/T and close the menu.
Available data code combinations in TAPE PLAY (VCR) mode :
D/TIME SEL.
Date
Time
Date & Time
Only Date & Time display is available in CARD PLAY (VCR) mode.
Notes:
• The data code will read "– – –" in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder's memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on the GL2 is played back on a different DV camcorder, the data code may
not be displayed correctly.
• The data code will appear in the display even if DISPLAYS (
the menu.
DATA CODE••• DATE/TIME
DATA CODE
(cassette
Date/Time
only)
JAN. 1,2002
12:00:00 AM
12:00 AM
JAN. 1,2002
Date/Time &
Camera data
Camera data
12dB
12dB F11
F11 1/250
1/250 JAN. 1,2002
12dB
12dB F11
F11 1/250
1/250 12:00:00 AM
12dB
F11
12dB 1/250
F11 12:00 AM
1/250 JAN. 1,2002
150) has been set to OFF through
E
91