Audio Recording - Canon DIM-462 Instruction Manual

Audio Recording

Selecting the Audio Mode
E
The GL2 can record sound in two audio modes:
• 16-bit (48 kHz, 2 channel) for the highest sound quality
• 12-bit (32 kHz, 2 from 4 channels) for recording on two channels (stereo 1), leaving two channels
(stereo 2) free for you to add new sound at a later date.
+
TAPE CAMERA
* Only available when AUDIO DUB. has been set to MIC. IN.
VCR SET UP
( 20)
1. To switch the mode, open the VCR SET UP submenu and select AUDIO MODE.
2. Select a mode and close the menu.
• The name of the selected mode is displayed for 4 seconds.
Note:
• For audio output details and how to play back a tape with added sound on stereo 2, see p. 111.
Selecting the Built-in Microphone Sound
You can select the microphone sound to match the recording situation.
+
TAPE CAMERA
* Only available when audio AUDIO DUB. has been set to MIC. IN.
VCR SET UP
( 20)
1. Open the VCR SET UP submenu and select MIC.
2. Select the setting and close the menu.
NORMAL:
VOICE:
W. SCREEN:
56
+
TAPE
,
+
TAPE
,
General recording.
When recording a person's voice.
In windy places such as the beach or near buildings. Note that low sound may be
reduced together with the wind noise.
*
PLAY
(VCR)
AUDIO MODE•• 16b i t
*
PLAY
(VCR)
MIC••••••••••NORMAL