Canon DIM-462 Instruction Manual page 100

Dubbing
E
1. Find a point on your recorded cassette slightly before the section you wish to
copy and set it to playback pause mode.
2. Press the camcorder's REC PAUSE button.
• The camcorder enters record pause mode.
3. Start playback on the other digital device while you monitor the picture.
4. Press the e/a (play/pause) button on the camcoder or the PAUSE a button on
the wireless controller.
• Recording starts.
5. When you get to the point where you wish to stop recording, press the stop
button or the pause button.
• Recording stops.
6. Stop playback on the other device.
Notes:
• If the cable is not connected properly, or if the cable is not connected when you press REC
PAUSE, the camcorder displays the caution ' ' C HECK THE DV INPUT.'' An anomalous image may
also flash onto the screen.
• Blanks between recordings on the playback tape are recorded as anomalous images on the tape
that is being recorded to.
Copyright signal
Certain pre-recorded software tapes are copyright protected. If you try to play back such a cassette,
"COPYRIGHT PROTECTED PLAYBACK IS RESTRICTED" appears in the viewfinder for a few seconds
and then the camcorder displays a blank blue screen; you cannot view the contents of the cassette.
If you try to record from such a tape via the digital cable "COPYRIGHT PROTECTED DUBBING
RESTRICTED" appears in the display; you cannot record the contents of the tape.
100