Setting The Data Code - Canon Elura 50 User Manual

Setting the data code

You can also choose to display camcorder data (shutter speed and exposure
settings) in the data code.
PLAY
+
TAPE
(VCR)
DISP.SET UP
( 39)
To change, open the menu and select DISP.SET UP. Then select DATA
CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T and
close the menu.
Possible data code combinations for tapes:
DATA CODE
(tape only)
D/TIME SEL.
Date
Time
Date & Time
Notes:
• The data code will read "– – –" in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the camcorder's
memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on ELURA50 is played back on a different DV camcorder,
the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS (
set to OFF through the menu.
DATA CODE•••DATE/TIME
Date/Time
JAN. 1,2003
12:00:00 PM
12:00 PM
JAN. 1,2003
Camera data
F1.8
1/250
F1.8
1/250
F1.8
1/250
Date/Time &
Camera data
F1.8
1/250
JAN. 1,2003
F1.8
1/250
12:00:00 PM
F1.8
1/250
12:00 PM
JAN. 1,2003
159) has been
E
81