Setting The Data Code - Canon OPTURA200 MC Instruction Manual

Setting the Data Code

You can also choose to display camcorder data (shutter speed and exposure
settings) in cassette data codes.
+ PLAY
TAPE
(VCR)
DISP.SET UP
( 40)
To change, open the menu and select DISP.SET UP. Then select
DATA CODE, set it to DATE/TIME, CAMERA DATA or CAM. & D/T
and close the menu.
Possible data code combinations for cassettes:
DATA CODE
(tape only)
D/TIME SEL.
Date
Time
Date & Time
Notes:
• The data code will read "– – –" in the following situations:
– During playback of a blank section of tape.
– If the tape was recorded before entering the date and time in the
camcorder's memory.
– If the tape was recorded on a camcorder without a data code function.
– If noise or tape damage prevents the data code from being read.
• If a recording made on OPTURA200 MC is played back on a different DV
camcorder, the data code may not be displayed correctly.
• The data code will appear in the display even if DISPLAYS (
been set to OFF through the menu.
DATA CODE•••DATE/TIME
Date/Time Camcorder data
F1.8
JAN. 1,2002 1/250
F1.8
12:00:00 AM
1/250
12:00 AM
F1.8
JAN. 1,2002 1/250
Date/Time &
Camcorder data
F1.8
1/250
JAN. 1,2002
F1.8
1/250
12:00:00 AM
F1.8
1/250
12:00 AM
JAN. 1,2002
173) has
E
87