Download  Print this page

Troubleshooting - Canon DIM-462 Instruction Manual

Canon instruction manual digital video camcorder dim-462.
Hide thumbs

Advertisement

Table of Contents

Troubleshooting

Refer to this checklist first if you have any problems with your camcorder. Possible explanations are
given for each problem on the list — turn to the page numbers in parentheses for more
information.
Make sure that the camcorder is properly connected if you are using it with a TV or VCR. Consult
your dealer or service outlet if problems persist.
Recording/Playback
Problem
? Nothing happens when I press the
buttons.
? The camcorder turned itself off.
? The cassette compartment stopped mid-
operation while loading/unloading a
cassette.
? The start/stop button does not work.
? There is no picture in the display.
? There is a blank blue screen in the display.
? The camcorder does not focus.
Cause and/or what to do about it
• The camcorder is not set to the appropriate mode
(
35, 87).
• The cassette is not loaded or is set for erasure
prevention (
18-19).
• The cassette has reached the end.
• The power source is not properly connected, or
the battery pack is exhausted or not properly
attached (
16-17, 137).
• The function cannot be used in that recording
program (
52).
• The camcorder was in record pause mode for more
than about 5 minutes (
• The battery pack is exhausted (
• The battery pack's power is exhausted. Recharge
or change to a new battery pack (
• The cassette is not loaded or is set for erasure
prevention (
18-19).
• The cassette has reached the end.
• The camcorder is not set to the appropriate mode
(
35, 87).
• You are attempting to play back or record
copyright protected material (
• The video heads are badly contaminated (
• The camcorder is on manual focus (
• The viewfinder lens needs adjusting (
• The lens is dirty (
140).
36, 118).
17, 137).
17).
100).
141).
79).
14).
E
143

Advertisement

Table of Contents

   Related Manuals for Canon DIM-462

This manual is also suitable for:

Gl27920a001 - gl 2 camcorder

Comments to this Manuals

Symbols: 0
Latest comments: