Canon DIM-462 Instruction Manual page 31

Turning Off the Tally Lamp
The tally lamp lets you know that the camcorder is recording.
However, its flashing may be reflected into the lens during
close-up recording, or when recording through glass.
You may therefore decide to turn it off.
+
TAPE CAMERA
SYSTEM
( 20)
1. Open the menu and select TALLY LAMP.
2. Select the OFF setting and close the menu.
• The tally lamp no longer flashes during recording, but it will still light up when the camcorder
receives a signal from the wireless controller.
PLAY
+
TAPE
,
(VCR)
TALLY LAMP•• ON
PLAY
+
CARD
,
(VCR)
E
31