Canon DIM-462 Instruction Manual page 109

Preparations
Turn the camcorder's POWER switch to PLAY (VCR) and move the camcorder's TAPE/CARD switch to
TAPE. Load a recorded cassette.
• Make sure the REC/SAVE tab on the cassette has been slid to REC (closed position).
Dubbing
Do not connect/disconnect any cables to/from the camcorder when dubbing audio or preparing to
dub audio.
PLAY
+
TAPE
(VCR)
VCR SET UP
( 20)
1. Open the menu and select VCR SET UP.
2. Select AUDIO DUB.
3. Select AUDIO IN or MIC. IN and close the menu.
4. Locate the point where you wish to start audio dubbing, then press the e/a
button or the PAUSE button.
• You can use the playback buttons on the camcorder or the special playback functions on the
wireless controller in the same way as in playback mode.
• The camcorder becomes set to playback pause mode.
5. Press AUDIO DUB.
• AUDIO DUB. and 2a appear on the display.
/
AUDIO
REC LEVEL
A M
AUDIO DUB.••• AUDIO IN
ZERO SET
SEARCH
MEMORY SELECT
AUDIO
REW FF
DUB. PLAY
AV
– / STOP + /
INSERT
× 2
PAUSE SLOW
REMOTE SET
109
E