Factory Default Settings - NETGEAR CGD24Nv2 User Manual

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
Table A-1. Technical Specifications (continued)
Specification
Wireless
Radio Data Rates
Frequency
Operating Frequency Ranges
Encryption

Factory Default Settings

You can use the Restore Factory Settings button located on the rear panel of your gateway to reset
all settings to their factory defaults. This is called a hard reset. To perform a hard reset, push and
hold the Restore Factory Settings button for 5 seconds. The gateway will reboot and return to the
settings shown in the following table.
Table A-2. Default Configuration Settings
Feature
Gateway Login
User login URL
User name (case sensitive)
Login Password (case sensitive)
A-2
Description
1, 2, 5.5, 6, 9, 12, 18, 24, 36, 48, 54, and 108 Mbps
Auto Rate Sensing
2.4-2.5 GHz
2.412~2.462 GHz (US)
2.412~2.472 GHz (Japan)
2.412~2.472 GHz (Europe ETSI)
40-bit (also called 64-bit), 128-bit WEP data encryption,
WPA-PSK(TKIP), and WPA2-PSK(AES)
Default Behavior
http://192.168.1.1
admin
password
Technical Specifications and Factory Default Settings
v1.0, August 2009