NETGEAR CGD24Nv2 User Manual page 57

1. Log in to the gateway as described in
2. In the main menu, under Advanced, select Port Forwarding. The Port Forwarding screen
displays.
Figure 5-5
3. Under Choose Predefined Service, select a predefined service from the Services pull-down
menu. (For example, FTP, which uses TCP ports 20 and 21.)
4. As an option, you can also specify a custom rule that is not in the list of predefined services by
specifying the following settings in the Add Custom Rules table:
• Name. Enter a name for the service.
• Start Port. Enter the start port for the service.
• End Port.Enter the end port for the service.
• Protocol. Select the protocol for the ports:
– TCP. Select TCP only.
– UDP. Select UDP only.
– Both. Select both TCP and UDP.
• Local IP Address. Complete the local IP address for the computer that is using the
service.
Customizing Your Network
DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
"Logging in to the Gateway" on page
v1.0, August 2009
1-5.
5-9