NETGEAR CGD24Nv2 User Manual page 26

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
To configure WEP data encryption:
1. Log in to the gateway as described in
2. In the main menu, under Setup, select Wireless Settings.
3. By default, WEP is selected in the Security Options section of the screen.
Figure 2-2
4. Depending on the encryption strength that you want, select one of these options:
• WEP (Wired Equivalent Privacy) 128-bit encryption
• WEP (Wired Equivalent Privacy) 64-bit encryption
5. Enter the WEP encryption key information:
• WEP PassPhrase: To use a passphrase to automatically generate the keys, enter a
passphrase and click Generate. Wireless stations must use the passphrase or keys to
access the gateway.
• Key 1 through Key 4: You can manually enter the four data encryption keys. These values
must be identical on all computers and access points in your network. For 64-bit WEP,
enter 10 hexadecimal digits (any combination of 0–9 or A–F). For 128-bit WEP, enter
26 hexadecimal digits.
2-6
"Logging in to the Gateway" on page
v1.0, August 2009
1-5.
Wireless Configuration