Using Address Reservation; Enabling Remote Management - NETGEAR CGD24Nv2 User Manual

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual

Using Address Reservation

When you specify a reserved IP address for a computer on the LAN, that computer always
receives the same IP address each time it accesses the router's DHCP server. Reserved IP
addresses should be assigned to computers or servers that require permanent IP settings.
To reserve an IP address for DHCP use, enter the DHCP server reservation settings for the private
LAN under DHCP Reservation Lease Info in the LAN IP screen:
1. Enter the MAC address of the PC for which you want to reserve an IP address.
2. Enter the permanent IP address for the PC.
3. Click Add to save your settings.
The MAC address and IP address are displayed in the DHCP Client Lease Info table. The current
system time is also displayed.
To delete an IP address from the DHCP Client Lease Info table:
1. In the DHCP Client Lease Info table, click the radio button for the MAC and IP address that
you want to remove.
2. Click Delete to remove the information for the selected MAC and IP address from the DHCP
Client Lease Info table.
To remove all information from the DHCP Client Lease Info table, click Clear DHCP Leases.

Enabling Remote Management

With Remote Management, you can allow a user or users on the Internet to configure, upgrade,
and check the status of the gateway.
To configure the gateway for remote management:
1. Log in to the gateway as described in
5-16
"Logging in to the Gateway" on page
v1.0, August 2009
1-5.
Customizing Your Network