Restricting Access By Mac Address - NETGEAR CGD24Nv2 User Manual

• Enter the MAC address of the device to be added to the access list in the Add Access Filter
fields. The MAC address can usually be found on the bottom of the wireless device. Then
click Add.
5. Click Apply to save these settings. Now, only devices in the Access List table will be allowed
to wirelessly connect to the gateway.

Restricting Access by MAC Address

By default, the gateway allows any connected PC to access the Internet through. The MAC
Filtering screen enables you to block specific PCs, based on their MAC address, from access to the
Internet on selected days and times.
To configure MAC filtering:
1. In the main menu, under Advanced, select MAC Filtering. The MAC Filtering screen displays.
Figure 5-3
Customizing Your Network
DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
v1.0, August 2009
5-5