NETGEAR CGD24Nv2 User Manual page 34

DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
4. Fill in the Name (SSID) field. You can enter a value of up to 32 alphanumeric characters. For
the guest network, the same name must be assigned to all wireless devices in your network.
The name is case-sensitive. For example, GuestNetwork is not the same as Guestnetwork.
5. At the bottom of the screen, click Apply to enable the selected guest network.
6. Configure wireless security for the guest network.
This process that is very similar to configuring wireless security for the gateway. For more
information, see "Configuring WEP (Wired Equivalent Privacy) Wireless Security" on page 2-
5 and "Configuring WPA or WPA2 Wireless Security" on page
Note: The Restore Guest Defaults button allows you to erase the changes made in this
screen and return the settings to their factory defaults.
2-14
v1.0, August 2009
2-7.
Wireless Configuration