Configuring Logs - NETGEAR CGD24Nv2 User Manual

This chapter describes how to use content filtering and firewall rules for the gateway.
Note: Log in to the gateway using its default address of http://192.168.0.1 or at whatever
IP address the unit is currently configured. To access the content filtering features
you must log in to the gateway with the mso user name and its default password
changeme, or whatever new password you have set up.
This chapter includes:
• "Configuring Logs" on this page
• "Blocking Sites" on page 3-2
• "Blocking Services" on page 3-4

Configuring Logs

A log is a detailed record of the Denial of Service (DoS) attacks directed at your network. You can
use e-mail notification to receive these logs in an e-mail message. If you do not have e-mail
notification set up you can connect to the gateway to view the logs.
To receive logs by e-mail:
1. In the main menu, under Content Filtering, select Logs. The Logs screen displays:
Figure 3-1
v1.0, August 2009
Chapter 3
Content Filtering
3-1