Logging in to the Gateway
Note: To connect to the gateway, your computer must be configured to obtain an IP
address automatically via DHCP. For instructions on how to do this, see the link to
the online document
To log in to the gateway:
1. Using the computer that you first used to access your cable modem Internet service, connect to
the gateway by typing http://192.168.0.1 in the address field of your Internet browser. A login
window opens.
Figure 1-5
The gateway has two user names with passwords:
•
To access all features of the gateway, log in with the user name superuser and its default
password of password, both with lower-case letters.
•
To access all features of the gateway except content filtering and MAC filtering, log in
with the user name admin and its default password of password.
2. Enter a user name and password to log in to the gateway, both with lower-case letters.
Note: If you cannot connect to the gateway, see
Connecting the Gateway to the Internet
DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
"Preparing Your Network" in Appendix
v1.0, August 2009
B.
"Basic Functions" on page
6-1.
1-5