Configuring Wpa Or Wpa2 Wireless Security - NETGEAR CGD24Nv2 User Manual

• Select which of the four keys will be the default. Data transmissions are always encrypted
using the default key. The other keys can only be used to decrypt received data. The four
entries are disabled if WPA-PSK or WPA authentication is selected.
6. Click Apply to save your settings.

Configuring WPA or WPA2 Wireless Security

Note: Newer wireless adapters support WPA. Windows XP and Windows 2000 with
Service Pack 3 or above include the client software that supports WPA. The
wireless adapter hardware and driver must also support WPA. Consult the product
documentation for your wireless adapter and WPA client software for instructions
on configuring WPA settings.
To configure WPA in the gateway:
1. Log in to the gateway as described in
2. In the main menu, under Setup, select Wireless Settings.
3. Select a WPA setting:
Figure 2-3
• WPA-PSK [TKIP]. TKIP encryption type and a pre-shared key passphrase.
• WPA2-PSK [AES]. AES encryption type and a pre-shared key passphrase.
Wireless Configuration
DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
"Logging in to the Gateway" on page
v1.0, August 2009
1-5.
2-7