NETGEAR CGD24Nv2 User Manual page 65

2. In the main menu, under Advanced, select Remote Management to display this screen:
Figure 5-9
3. Select the Allow Remote Management check box.
4. Enter the following information:
• Remote Password. Enter the user name that will be used from the remote PC to manage
the gateway. This password is different from the password that you use to log into the
gateway from your LAN.
Note: Be sure to change the gateway's remote management password to a very
• Port Number. Specify the port number that will be used for accessing the management
interface. The default port number is 80.
Note: Web browser access normally uses the standard http service port 80. For
5. Click Apply to save your changes.
Customizing Your Network
DOCSIS 2.0 Advanced Cable Gateway CGD24N v2 User Manual
secure password before enabling remote management. The ideal password
should contain no dictionary words from any language, and should be a
mixture of letters (both upper and lower case), numbers, and symbols.
Your password can be up to 16 characters.
greater security, you can specify a custom port by entering that number in
the Port Number field. Choose a number between 1024 and 65535, but do
not use the number of any common service port. The default is 8080,
which is a common alternate for http.
v1.0, August 2009
5-17