Recording Type; Manual Recording; Automatic Recording - Saadat Dena User Manual

Recording Type

Manual Recording

Press Mode key on the screen or the control panel to toggle between Manual 6, and Manual 12.
Press the Start/Stop key on the control panel to start recording. The recording will continue until you
press this key again.
Press Lead▲ and Lead▼ keys to switch lead (lead group) during the recording. Note that you can
only record the selected lead (s).
■ Manual 12 : Select this mode and press Lead▲ and Lead▼ keys to choose between lead groups.
Then press the Start/Stop key to start recording.
■ Manual 6 : Select this mode and press Lead▲ and Lead▼ keys to choose between lead groups.
Then press the Start/Stop key to start recording.
In Manual 6 mode, you can select previous or next lead (lead group) using
Lead▲ or Lead▼ key.
In Manual modes, you can stop recording only by pressing Start/Stop key.

Automatic Recording

Press Mode key on the screen or the control panel to toggle between Auto 6, and Auto 12.
Press Start/Stop key on the control panel to start recording for 3-12 seconds (Refer to Navigation
Drawer Rec Mode).
It is not possible to toggle between different leads using Lead▲and Lead▼ keys.
■ Auto 12 : Select Auto 3 press the Start/Stop key to start recording in this mode.
■ Auto 6 : Select Auto 6 press the Start/Stop key to start recording in this mode.
.
.
26